Programmable motor exhaust temperature alarm

Sale  only to professionals

Detects the high temperature in the exhaust pipe

 when not enough flowing seawater.

Retail price of € 99,22  at official distributors

Volts
  • Muy professionals Muy professionals
  • Servicio postventa Servicio postventa
  • Red distributtion Red distributtion

Description:

Detects the high temperature in the exhaust pipe when not enough seawater flows

 acoustically and visually warns of high temperature before it does the motor itself

 increasing security

Programmable temperature to adapt to all types of engines

 It is installed in the exhaust pipe with the clamp and its built-in sensor

Advantages of this equipment over those that exist in the market:

Easy assembly without removing any part of the exhaust, the clamp is opened and placed around the tube or elbow and ready.

Programmable fits any motor

Test the operation, without having to overheat the engine

The sensor is not in contact with water and smoke

Price

 

Functioning:

Set the maximum exhaust temperature, to adjust the overheating alarm. It is enough to observe

the highest temperature your escape reaches during normal navigation, and then set the alarm

to sound over this

Programming of the maximum alarm temperature, when overcoming this, it will warn aquatically and visually, thus avoiding damage to the motor

 

Detects

 Lack of seawater flow (Boats)

 High temperature in the engine

Connections:

12V or 24 V power

Connection to elbow or exhaust pipe

                       

 

Characteristics

12v optional 24v power

Programmable alarm temperature from 0 to 115 degrees

Continuous digital temperature monitoring

Resolution 0.1 degree

Acoustic alarm exceeding programmed temperature

Visual alarm with LED on the display

Optional external buzzer

Optional external siren

Mounting: recessed and surface

Dimensions.L x P x H = 74x70x34mm

Temperature sensor with clamp and 2.5 meters of cable (can add up to 100 meters of cable extension of 2x0.75mm minimum diameter

Available diameters:

 clamp stainless steel 316 continuous from 30 to 310mm

Note: select the working voltage 12 or 24 Volts in the top menu

Example: from 30 to 310 mm, it closes up to 30mm and its maximum diameter 310mm

 

If you do not know the diameter of the tube, you can measure the circumference around the tube in mm and divide by 3.142

Example: for a circumference of 500 mm

 

500mm: 3,142 = 159,1mm, it would be within the range between 30 and 310mm

 

 

Included:

Complete alarm for installation:

CPU display with intermo buzzer

Sensor

2.5 meter wiring (extendable up to 100 meters with cable 2x0.75mm)

Installation Manual

       

MANUAL_4.png     guia.png

AT605/AT606